One of Best Hi-Tech Products in the market Hydrology9 by Cloudious9
Hydrology9 only has one button press it three times to turn it on, you then push it 1 more time and it will start heating up. To change the temperature of the device, it needs to be on. It can be heating up or held at a set temperature. Each time you press it will rise upwards to the next highest setting. The temperature for the 5 preset settings are as followed. Cloudious9 intentionally has the highest setting set to above the point of combustion for those who want a bigger hit.
Lights on Hydrology9 and Temp Settings
Blue – 200C– 392F
Greenish Yellow – 210C – 410F
Orange – 220C – 428F
Purple – 230C – 446F
Red – 240C – 464F
Temperatures
The Hydrology9 has five preset temperatures that are indicated by 5 different colored flashing lights. Blue is the lowest temperature setting and red is the highest. In order to turn the device on you need to push the power button quickly three times. Then to choose a heat setting you press the power button again once. This will activate the Hydrology9 and begin heating it to the previously set temperature.
If you want to switch through to a different heat setting you just push the power button again, each time your press it, it will flash a different color. The Hydrology9 will continue to flash one of the five colors until the temperature has reached the current setting. After about 50 seconds the LED lights will stop flashing and will turn solid green. Solid green means the Hydrology9 is ready and you should begin inhalation.
It is recommended that users leave for 3 to 5 seconds in between each inhalation. This, to allow the oven to get back to the desired temperature. Each session will last 2 minutes, followed by a 60 second cool down. The solid green light will turn flashing blue then solid blue for 60 seconds. After, the blue light turns off you can press the power button to start a new session.
In case, you are a vaporizer geek that wishes to have the cutting-edge-day and best unit on the market. You’ll want to get your fingers on the Hydrology9.
Battery
The Hydrology9 is built with an internal 2000 mAH Lithium Polymer battery that lasts around 11-15 sessions it 2 minutes per average session, takes two to three hours to get back up to full charge.
The vaporizer industry become starting to get boring, besides a few mentions. Furthermore, this guys rock the industry with innovation, pushing the boundaries.
It´s definitely a must! So, pack your favorite Herbs, adjust the vents and temperature. Yes! you are ready to Puff! A big round of applause to the designer of this well-made vaporizer!
Happy Vaping! 🙂
